Description
Description: 1 in x 0.06 (1.5 mm) x 8 ft (2.44 m) roll for environments below 260 C° (500 F°)
Fuseall™ Outdoor / Sport Wraps provide excellent thermal properties, vibration isolation, electrical insulation, and a soft, tactile response perfect for nearly any situation.
Fuseall™ is a Low-Density Self-Fusing Sponge Silicone Wrap that bonds only to itself and not the substrate for which it is applied. Wind the wrap onto itself to create a tight, secure fit without any sticky residue.
MADE IN THE USA • New Philadelphia, OH
Application: (Click here for detailed application instructions)
FUSEALL™ Outdoor / Sport Wraps are self-fusing, or self-amalgamating, sponge-like silicone wrap that will bond to itself without the need of secondary adhesives. It will not directly bond to a substrate without winding the wrap onto itself. Remove liner as you wrap; maintain a constant stretch of no more than 200% and no less than 50% of the original unstretched wrap length. As you continue to wrap, ensure each new layer covers a minimum of 25% of the previous layer for optimum fusion. Once wrapped it will immediately begin to fuse--full fusion achieved within 24 hours. For removal, simply cut Fuseall™ off the wrapped substrate and reapply a new layer. No need to clean the substrate before applying, simply remove excess debris and moisture.
Fuseall™ can be implemented practically everywhere that requires a fast, simple but effective tape or wrap to protect, insulate, isolate, or provide grip in a wide range of environments.
It can be used in place of conventional dense self-fusing silicone tape or wraps, wire and cable tapes, thermal / IR shielding, noise dampening material, grips, and handles.
Outdoor / Sport Wrap Colors:
Black, Flat Dark Earth (Tan), and Olive Drab (Green)
Fuseall™ Wraps Features:
Non-Adhesive System, Low Thermal Conductivity, Lightweight and Buoyant, Water Resistant, Vibration Isolation, Low Emissivity, Made in the USA
Fuseall™ Wraps Benefits:
Highly Insulating, Soft Tactile Response, Prevents Thermal Extremes
Technical Specs: (Specific to Fuseall™ Outdoor / Sport Wraps)
Property | Test Method | Typical Value |
Color | Any | |
Thickness,
|
0.06 in 1.5 mm |
|
Standard Width, |
1 in 25 mm |
|
Duro Hardness, Shore O | D-2240 | 40 |
Density, |
0.55 - 1.00 ,g/cc 500 - 1000 ,kg/m3 |
|
Tensile Strength,
|
D-412 |
250 ,psi 1.72 ,N/mm2 |
Elongation, % | D-412 | 500 |
Compression Set 22 hrs. @ 100 C° (212F°) |
D-395 | 9% |
Rebound Resilience Pendulum (J*m-3) |
ASTM D7121 | 32.6 |
Thermal Conductivity. 25 C° ( 77 F°) , W/m Deg LK |
ASTM E1530 |
0.133 |
Water Absorption 46 hrs.in H20 @21 C° (69.8 F°) |
Mil-I-46852C |
0.08 |
Dielectric Strength volts/mi |
ASTM D149 |
280 |
Bond Strength, |
2.94 , Lbf-in 332 ,N-mm |
|
Low Temp Brittleness 3 min at -65 C° (-149 F°) |
ASTM D2137 and A-A-59588 Cl 2A |
PASS |
Air Aging Properties - From Wrap not ASTM slabs |
70 hrs. @ 225 C° (437 F°) ASTM D573 |
|
||||||||||||
24 hrs. @ 260 C ° (500 F °) ASTM D573 |
Duro Hardness, Shore O | D-2240 | 45 (+4) |
Tensile Strength | D-412 | 1.53 N/mm2 | 222 psi |
Elongation | D-412 | 180 |
Bend (Flat) | No Cracks | No Cracks |
The information contained in this product description or any data sheet is intended to assist you in designing with FUSEALL™ wrap. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on the Data Sheet will be achieved by a user for a particular purpose. The user should determine the suitability of FUSEALL™. 102720/RevE. |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.