Fuseall™ Anti-Microbial Wrap

Dimensions: 1in x 0.06in x 7ft

Protect yourself and your family members, employees, and customers from disease-causing microorganisms with the Fuseall™ Anti-Microbial Wrap. ™Fuseall™ Anti-Microbial maintains the same low-density and lightweight self-fusing capabilities as Fuseall™ General Purpose Wrap, while adding the power of anti-microbial material that resists the growth of bacteria, fungi, and other biological contaminants.

Fuseall™ Anti-Microbial Wrap withstand extreme temperature, pressure, voltage, moisture and retain self-fusing capabilities despite repeated flexing and exposure to the elements. It begins fusing immediately when applied and can be easily removed without leaving any sticky residue.

Fuseall™ Anti-Microbial Wrap can be applied on any surface and is specifically designed for high-traffic areas, such as:

• Door handles
• Hand rails
• Hospital bed rails
• Carts
• Steering wheels
• Brooms and mops

Fuseall™ Anti-Microbial Wraps are available in <colors>. Made in the USA.

Application Instructions

1. Unwind needed length from roll and remove the plastic liner. Recycle the liner or dispose of it properly.
2. Stretch Fuseall™ at a minimum of 50% to a maximum of 200% when applying. Ensure that no contaminants get between the layers which could inhibit fusion.
3. DOUBLE WRAP the object at the start of application. This will prevent slippage of concurring wraps and create a strong bond anchor point.
4. Ensure that you continue to stretch Fuseall™ 50% to 200% and overlapping a minimum of 25% to the previous layer.
5. At the end, DOUBLE WRAP the object again. This will prevent Fuseall™ from unwinding. Sufficient stretch and pressure is absolutely necessary to a proper bond. If unwinding occurs after fusion time is achieved, simply cut back the unwound section.

Fuseall™ will achieve optimal fusion with sufficient pressure, stretch and overlaps. Keep Fuseall™ in a tightly sealed container when not in use.

For international orders, contact us at info@lumawaresafety.com